Mains pressure hot water from an open
vented thermal store
Whilst
highly desirable, mains pressure hot water has historically brought with it the dangers associated
with unvented (pressurised) cylinders - EXPLOSION! Until the advent of the
Boilermate that is!
|
|
|
|
|
With the simple yet clever addition of a
mains-pressure heat exchanger a normal gravity pressure open-vented
vessel can be transformed to provide mains pressure hot water with
performance to match any other system.
High performance mains pressure hot water without
any of the baggage unvented systems bring with them - G3
Building Regs,
Specialist Installers, Risk of explosion, pressure relief issues and
pipework etc. |
Boilermate - Recognised by many of the
UK's national house builders
The Boilermate system has been widely used throughout the UK within
the 'new-build' sector and by discerning householders for many years.
Recognising the superior performance and advantages of the system over
others, Boilermate has become a household name throughout the country.
Boilermate has evolved
Throughout many years of service the
Boilermate system has passed through several evolutionary
stages. Each upgraded model superseded all previous models. All
though function has varied slightly over years the Boilermate's
primary function of providing mains pressure hot water has
remained a constant. The BMSCP Eco Stainless will be suitable to
replace older models even if a small amount of adjustment to
pipework is necessary.
Convert your present hot water
system with Boilermate
Boilermate is also popular if you wish
to convert an existing gravity hot water system to mains
pressure. Being so easy to install Boilermate lends itself to
retrofit, upgrading your household hot water system with little
fuss. |
|
|
Boilermate BP
If you are looking to upgrade your system
(which can be done with consummate ease) or you wish to replace an
earlier version with the new Boilermate BP you might like
to call our office to learn more.
As a replacement
For those wishing to replace earlier
versions of the Boilermate and Systemate
please be advised that while the function remains similar the new BP model differs internally. Earlier
models contained various auxiliary components (pumps, circuit boards, timers etc).
The design of the new Boilermate BP has made the function
and therefore the need for certain internal components on the earlier
model redundant. The new unit will however need a couple of items added
externally in order to function - namely a circulating pump and
programmer.
It must also be mentioned
that the function of the new Boilermate BP is to produce
mains pressure hot water only - unlike some earlier models of Boilermate
that also managed domestic heating requirements. When replacing some
earlier models minor adaptation of pipework may be necessary to
facilitate a Y or S plan installation.
A 3kW immersion heater and
a choice of scale inhibitors is available. These however are options and
must be stated and ordered at time of purchase.
The removal of certain
internal components has made the Boilermate visually and operationally
less intimidating to plumbers unfamiliar with the product and/or the
principles of Thermal Storage. It has also reduced the purchase cost
substantially!
For further more detailed
explanation of the Boilermate Thermal Store please click here or call for advice. |
